Omnisistem Spark 7 Zoom Manual do Utilizador descarregar pdf (Página 21)

selection"Alone"meansstandalonemodeand"Master"thatthedeviceisdefinedasmaster.



Music

Withthisfunctionyoucanruntheinternalprograminsoundcontrolledmode.Theselection"Alone"means

standalonemodeand"Master"thatthedeviceisdefinedasmaster.



SelectChaseforAutoProgram

WiththisfunctionyoucanselecttheprogramfortheProgramRun.



EditChase

Withthisfunctionyoucanedittheinternalprograms.



Editscenes

Withthisfunctionyoucaneditthescenesoftheinternalprograms.



Rec.Controller

The device features an integrated DMX recorder that allows you to transmit the programmed scenes from your                

DMX controller to the device. Adjust the desired scene numbers by pressing Up or Down. When you call up the                   

scenesatyourcontroller,theywillautomaticallybetransmittedtothedevice.



Excursion:

Amasterunitcansenduptothreedifferentdatagroupstotheslaveunits,i.e.amasterunitcanstartthree

differentslaveunits,whichrunthreedifferentprograms.Themasterunitsendsthethreeprogrampartsina

continuousloop.



The slave unit receives data from the master unit according to the group which the slave unit was assigned to. If                    

e.g. a slave unit is set to “Slave 1” in the menu “Set to Slave”, the Master unit sends “Auto Program Part 1” to                       

theSlaveunit.Ifsetto“Slave2”,theslaveunitreceives“ChasePart2”.



ToStartanAutoProgramProceedasFollows:



Slave Setting

1. Select “Program” by pressing Up or Down.

2. Press the Enter-button to confirm.

3. Select “Slave” by pressing Up or Down.

4. Press the Enter-button to confirm.

5. Press Up or Down to select “Slave 1”, “Slave 2” or “Slave 3”.

6. Press the Enter-button to confirm.

Automatic Program Run

1. Select “Program” by pressing Up or Down.

2. Press the Enter-button to confirm.

3. Select “Sequence” by pressing Up or Down.

4. Press the Enter-button to confirm.

5. Press Up or Down to select “Master” or “Alone”. The selection "Alone" means Stand Alone-mode and

6. "Master" that the device is defined as master.

7. Press the Enter-button to confirm.

Program for Select Chase

1. Select “Edit Chase” by pressing Up or Down.

2. Press the Enter button to confirm.

3. Select “Select Chase” by pressing Up or Down.

4. Press the Enter button to confirm.

5. Press Up or Down to select “Chase Part 1”, “Chase Part 2” or “Chase Part 3”, and thus select which

6. Slave program is to be sent. Selection “Part 1” means, that the Slave unit runs the same program as the

master units.

7. Press the Enter button to confirm.

21 of 25

1 2 ... 16 17 18 19 20 21 22 23 24 25

Comentários a estes Manuais

Sem comentários

Omnisistem Spark 7 Zoom Manual do Utilizador Página 21

Comentários a estes Manuais

Manuais e produtos relacionados com Iluminação Omnisistem Spark 7 Zoom